Epson Stylus CX7300 Service Manual

EPSON Stylus CX7300/CX7400/DX7400/NX200/TX200 series/SX200 series/Stylus CX8300/CX8400/DX8400/NX400/TX400 series/SX400 series Revision C
DISASSEMBLY/ASSEMBLY Disassembling the Printer Mechanism 114
Confidential
4.5.6 Front Frame/Right Frame
 Parts/Components need to be removed in advance
Document Cover/ASF Cover/Scanner Unit/Panel Unit/Upper Housing/Card Slot
Cover/Lower Housing/Main Board Unit/Left Frame
 Removal procedure
1. Remove the acetate tape (x1) that secures the Head FFC to the Front Frame.
2. Release the Head FFC from the hooks (x3) of the Front Frame.
3. Remove the Grounding Spring from the Front Frame.
Figure 4-48. Removing the Front Frame/Right Frame (1)
 When installing the Left Frame, lead the PF Encoder FFC
through the hole of the Left Frame.
Figure 4-47. Routing the PF Encoder FFC
 When installing the Left Frame, match the guide pins (x2) of
the Base Frame with their positioning holes (x2) of the Left
Frame as shown in
Figure 4-46.
 Tighten the screws in the order given in Figure 4-46.
Left Frame
PF Encoder FFC
Hole
acetate tape
Grounding Spring
Hook
Front Frame
Head FFC

Epson Stylus CX7300 Specifications

General

Device Type	Multifunction printer
Printer Type	Inkjet
Maximum Print Resolution	5760 x 1440 dpi
Scanner Type	Flatbed
Scanning Resolution	1200 x 2400 dpi
Interface	USB 2.0
Ink Cartridge Configuration	4 individual ink cartridges
Inkjet Technology	Epson Micro Piezo
Display	LCD
Media Type	Plain paper, photo paper
Standard Media Size	A4
Paper Sizes Supported	A4, A5, B5, Legal, Letter
Dimensions (W x D x H)	43.4 cm x 32.7 cm x 18.5 cm
Weight	5.9 kg