Epson Stylus Photo 925 - Adjustment Program; Outline; Starting up the Adjustment Program

EPSON Stylus Photo 925 Revision A
Adjustment Adjustment Program 122
5.3 Adjustment Program
The service program operates on Windows programs on the Windows 98 platforms.
5.3.1 Outline
This program is executes individually for each item to be adjusted. It includes the
following adjustment and maintenance items.
5.3.2 Starting up the adjustment program
1. The following screen will be displayed when the service program is started up.
Figure 5-3. Program initial screen
2. Select the model name.
3. Select the number of the port to which the Stylus Photo 925 is connected to the
computer.
4. Click on the [OK] button. Main menu will be displayed.
C A U T I O N
T This program is specially designed for use on the Windows 98
platforms. It will not run on DOS, Windows 3.x, or XP.
T This program runs only on USB I/F.
Table 5-2. Adjustment Program
No. Main Menu Service Paper to be used See
1 Adjustment EEPROM initialization None p.123
Head ID A4 normal paper p.124
CR Motor drive dispersion None p.125
Bi-D adjustment A4 normal paper p.126
USB ID input None p.128
First dot position adjustment A4 plain paper p.129
Cut position adjustment A4 normal paper p.129
Memory card drive check None p.130
2 Maintenance
items
Head cleaning None p.131
Initial ink charge None p.131
Refurbishment for DOA None p.132
Protection counter check/reset None p.133
The number of the cutting operation None p.133
EEPROM backup data None p.134
3 Check pattern
printing
A4 normal paper printing A4 normal paper p.135
4 Appendix EEPROM data None p.136