EPSON Stylus Photo 925 Revision A
Adjustment Adjustment Program 134
5.3.16 EEPROM backup data
With this function, when replacing the Main Board, you can read all the information
from the old board and write it on the new board.
1. Click the [OK] button to start reading the data.
Figure 5-31. EEPROM backup data
2. The display as shown below will appear. According to the instruction, turn off the
power to the printer, replace the Main Board, turn on the power again and click [OK}.
Figure 5-32. Data backup checking window
3. Upon completion of successful backup, “EEPROM parameter backup is completed”
will be displayed in the central lower area on the screen.
Figure 5-33. Data backup completion screen
To Next Page
Loading...
