Epson Stylus Pro 4000 - Server Setup for Windows

The Control Panel 15
1
1
1
1
1
1
1
1
1
1
1
1
Combination of buttons
This section describes the function when several buttons are
pressed at the same time.
9 Paper check light
(red)
On:
No paper is loaded in the paper tray when
Sheet is selected as the paper source.
Roll paper is out when Roll Auto Cut On or
Roll Auto Cut Off is selected as the paper
source.
Selected paper source (Roll Auto Cut On
/Roll Auto Cut Off /Sheet ) does not match
the paper source in the printer driver.
Paper lever is in the released position.
The loaded paper is too thick for head
cleaning.
Flashing:
Paper is jammed.
Paper is not cut correctly after print job when
paper source is set as Roll Auto Cut On .
Paper is not loaded straight.
Paper is not detected.
Cut sheet is not ejected correctly.
Buttons Function
1. Power button
2. Pause button
If the printer is turned on while pressing and
holding Pause button, the printer enters
Maintenance Mode.