Epson Stylus Pro 4000 - Making the Paper Source Setting; Making the Borderless Setting

160 Printing with Mac OS 8.6 to 9.x
Making the Paper Source setting
You can select Roll Paper, Roll Paper (Banner), or Sheet from the
Paper Source pull-down menu. Select one that matches the paper
loaded in the printer.
Making the Borderless setting
You can print your data without margins on the paper.
For this printing mode, Epson recommends the following media
conditions.
Accommodate media width:
Note:
❏ You cannot perform borderless printing on cut sheet media with a
width of 420 mm (A2).
❏ When printing on roll paper with a width of 8 inches (203.2 inch)
or 420 mm (A2), attach the spacer to the spindle. See “Attaching
the spacer to the spindle” on page 238.
❏ 8 inch, 203.2 mm
❏ 210 mm (A4)
❏ Letter (8.5 in), 215.9 mm
❏ 10 inch, 254 mm
❏ 257 mm
❏ 297 mm (A3)
❏ 300 mm
❏ 12 inch, 304.8 mm
❏ 329 mm (Super A3/B)
❏ 13 inch, 330.2 mm
❏ 14 inch, 355.6 mm
❏ 400 mm
❏ 16 inch, 406.4 mm
❏ 420 mm (A2)
❏ 17 inch, 431.8 mm