226 Printing with Mac OS X
Performing borderless printing
When selecting Spro 4000: Borderless (Auto Expand) or
Spro4000: Borderless (Retain Size) as Format for in the Page
Setup dialog box and Printer in the Print dialog box, Epson
recommends the following media conditions.
Accommodate media width:
Note:
❏ You cannot perform borderless printing on cut sheet media with a
width of 420 mm (A2).
❏ When printing on roll paper with a width of 8 inches (203.2 inch)
or 420 mm (A2), attach the spacer to the spindle. See “Attaching
the spacer to the spindle” on page 238.
❏ If your application has margin settings, make sure they are set to
zero before printing.
❏ When printing on cut sheet media, only the left and right margins
are set to zero.
❏ The ink may contaminate the platen of the printer. In this case, wipe
the ink away using a cloth.
❏ 8 inch, 203.2 mm
❏ 210 mm (A4)
❏ Letter (8.5 in), 215.9 mm
❏ 10 inch, 254 mm
❏ 257 mm
❏ 297 mm (A3)
❏ 300 mm
❏ 12 inch, 304.8 mm
❏ 329 mm (Super A3/B)
❏ 13 inch, 330.2 mm
❏ 14 inch, 355.6 mm
❏ 400 mm
❏ 16 inch, 406.4 mm
❏ 420 mm (A2)
❏ 17 inch, 431.8 mm
To Next Page
Loading...
