Epson Stylus Pro 4000 - Making the Paper Settings

The Control Panel 37
1
1
1
1
1
1
1
1
1
1
1
1
9. After printing, the pattern number and current set number
are displayed. Select the set that has the smallest gaps, then
press the Paper Feed or Paper Feed button to display
the number for that set.
10. Press the Menu
button to register the set number. The next
pattern number appears. Then repeat step 9.
If you are not satisfied with the printed pattern, press the
Paper Source button to return to the previous level, and
select BI-D ALL.
If you are not satisfied with the printed pattern of BI-D ALL,
try UNI-D.
11. After you set the patterns, press the Pause
button to return
to the READY status.
Making the paper settings
You can register and recall your own paper settings according to
any media.
The paper settings you can make are:
❏ Platen gap
❏ Thickness pattern
❏ Thickness number
❏ Cut method
❏ Paper feed adjustment
❏ Eject roller type
❏ Drying time
❏ Suction
❏ MicroWeave adjustment