Epson Stylus Pro 4000 - Page 36

36 The Control Panel
2. Press the Paper Feed or Paper Feed button to display
HEAD ALIGNMENT, and press the Menu
button.
3. As PAPER THKNS is displayed, press the Menu
button.
4. Press the Paper Feed or Paper Feed button to select
STD or paper thickness value between 0.1 mm and 1.6
mm.When you want to print on Epson special media, select STD.
When you want to print on non-Epson special media, enter
the thickness value of the paper.
5. Press the Menu
button to register your value.
6. Press the Menu
button again. ALINGMENT is displayed on
the upper row, and AUTO is displayed on the lower raw on the
LCD.
7. Press the Menu
button to select MANUAL, and press the
Paper Feed or Paper Feed button to select BI-D BLACK.
If you are using Epson special media, and want to perform
head alignment with all colors, select BI-D ALL.
8. Press the Menu
button, and the printer starts printing.
Head alignment pattern examples (BI-D BLACK):
# 1
MK
123456789