Troubleshooting 299
7
7
7
7
7
7
7
7
7
7
7
7
For Windows 2000 or NT 4.0
1. Click the Start button, point to Settings and select Printers.
2. Right-click EPSON Stylus Pro 4000 in the Printers window,
then select Properties.
3. Click the Ports tab.
4. Make sure that your printer port is selected.
The USB printer device driver or the printer
software may be incorrectly installed (Windows
Me and 98 only)
If you canceled the plug-and-play driver installation in Windows
Me or 98 before the procedure was complete, the USB printer
device driver or the printer software may be incorrectly installed.
To ensure that the driver and printer software are installed
correctly, follow these steps.
Note:
The printer driver screens that appear in this procedure are for Windows
98. The appearance of the Windows Me printer driver screens differ only
slightly.
1. Click the Start button, point to Settings, and then click
Printers. Make sure that the icon for your printer appears in the
Printers window.
To Next Page
Loading...
