Epson Stylus Pro 4000 - Troubleshooting

Troubleshooting 291
7
7
7
7
7
7
7
7
7
7
7
7
NOZZLES STILL
CLOGGED
The nozzles are still
clogged.
Run the Head Cleaning
utility. For Windows, see
“Cleaning the print
head” on page 104. For
Mac OS 8.6 to 9.x, see
“Cleaning the print
head” on page 184. For
Mac OS X, see
“Cleaning the print
head” on page 232.
CHANGE PAPER
TYPE
The loaded paper does
not match the paper
type selected.
Match the loaded
paper to the paper
type. See “Buttons” on
page 12.
WRONG PAPER
SIZE
The loaded paper size
does not match the
data size.
Match the loaded
paper size to the data
size.
PAPER OUT No paper is set in the
printer
Load paper correctly.
Roll paper is out while
printing is in progress.
Load a new roll paper.
NO BORDERLESS
WITH THIS SIZE
RELOAD PAPER
Note:
Those messages
are displayed on
the LCD
alternately.
A2 size cut sheet media
has been installed for
borderless printing.
Install a different size of
cut sheet media or roll
paper. See “Making the
Borderless setting” on
page 75 for Windows,
“Making the Borderless
setting” on page 160 for
Mac OS 8.6 to 9.x, or
“Performing borderless
printing” on page 226
for Mac OS X.
RELOAD PAPER The printer cannot
detect the loaded cut
sheet media, because it
is wavy or curled.
Flatten the cut sheet
media.
The printer cannot
detect the loaded
paper.
Move the paper lever.