Epson Stylus Pro 4000 - Details of Selectype

22 The Control Panel
5. Set the item
Press the Menu
button to enter the selected item. The first
parameter is displayed on the LCD.
6. Select a parameter
Press the Paper Feed or Paper Feed button to select a
parameter for the item.
7. Set the parameter
Press the Menu
button to store the selected parameter. If
the parameter is for execution only, press the Menu
button
to execute the function for the item.
After execution, the printer exits SelecType mode and return
to the READY status.
8. Exit the SelecType mode
Press the Pause
button. The printer returns to the READY
status.
Details of SelecType
PRINTER SETUP
This menu contains the following items.
PLATEN GAP
You can adjust the distance between the print head and paper.
Normally, leave this set to STANDARD. If you find that the printed
image is smeared, select WIDE. Select NARROW for printing on a thin
paper. Select WIDER for printing on a thick paper.
PAGE LINE
You can select whether the lines along which to cut off are printed
on the roll paper. Select ON if you want to print page line. Select
OFF if you do not want to print page line.