Epson Stylus Pro 4000 - Setting Up Client Systems for Printing; Macintosh OS X Client Setup

The Control Panel 21
1
1
1
1
1
1
1
1
1
1
1
1
Basic SelecType setting procedure
This section describes how to enter the SelecType mode and how
to make settings with the buttons on the control panel.
Note:
❏ Press the Pause
button whenever you want to exit the SelecType
mode and return to the READY status.
❏ Press the Paper Source button to return to the previous step.
1. Enter the SelecType mode
Make sure that READY is displayed on the LCD, and press the
Menu
button. The first menu is displayed on the LCD.
2. Select a menu
Press the Paper Feed or Paper Feed button to select a
desired menu.
3. Set the menu
Press the Menu
button to set the selected menu. The first
item is displayed on the LCD.
4. Select an item
Press the Paper Feed or Paper Feed button to select a
desired item.
“MAINTEN
ANCE” on
page 32
“CUTTER REPL” on page 32 EXEC
“CHNG INK SET” on page 32 EXEC
“PWR CLEANING” on page 32 EXEC
“CLOCK SETTING” on page 32 YY/MM/DD HH:MM
MM/DD/YY HH:MM
“HEAD
ALIGNME
NT” on
page 33
“PAPER THKNS” on page 33 STD, 0.1 mm - 1.6 mm
“ALIGNMENT” on page 33 AUTO, MANUAL