Printing with Mac OS 8.6 to 9.x 175
4
4
4
4
4
4
4
4
4
4
4
4
This function is effective only when the print data length is shorter
than the printable width of the roll paper. The print data will
automatically be turned 90 degrees to print crosswise, saving roll
paper.
To enable this function, select Auto Rotate.
Print Page Line
This function lets you to specify whether to print a page line on
the right side and also below the printed data for manual cutting.
To enable this function, select Print Page Line.
The Print Page Line operation changes according to the Auto Cut
setting. Check these settings as necessary by referring the printer’s
operation.
Auto Cut Print Page Line Printer’s Operation
Single Cut
Double Cut
Normal Cut
Selected Prints page line on the right side only, and
cuts paper automatically after the print
job.
Single Cut
Double Cut
Normal Cut
Not selected Does not print page line, and cuts paper
automatically after the print job.
Off Selected Prints page lines on the right side and
below the printed data, but does not cut
paper automatically after the print job.
Off Not selected Does not print page lines nor cut paper
automatically after the print job.
Original Auto Rotate onAuto Rotate off
To Next Page
Loading...
