Epson Stylus Pro 4000 - Page 246

246 Paper Handling
3. Press the Paper Feed button or Paper Feed button to
match the cutting position on the paper with the cutting
position on the left side of the print head.
4. Press the Paper Source button to select Roll Auto Cut On
.
5. Press and hold the Paper Source button for 3 seconds. The
printer cuts the printout at the cutting position.
Printing page lines
If you want to print continuously on roll paper first, then cut the
page yourself after you finish printing, use the Print Page Line
setting.
To make the Print Page Line setting using the control panel, see
“PAGE LINE” on page 22.
To make the Print Page Line setting using the printer software,
see “Print Page Line” on page 85 for Windows, “Print Page Line”
on page 175 for Mac OS 8.6 to 9.x, or “Print Page Line” on page
223 for Mac OS X.