32 The Control Panel
DRYING TIME
You can set the ink drying time per print head pass. The range is
0 to 10 seconds.
SUCTION
You can set the suction pressure for feeding the printed-paper.
Select STANDARD, -1, -2, -3, or -4.
M/W ADJ
You can adjust the MicroWeave mode. The setting range is
STANDARD, 1 and 2. Increase the value to give priority to the
printing speed. Decrease it to give priority to the print quality.
MAINTENANCE
This menu contains the following items.
CUTTER REPL
You can see the procedure for replacing the paper cutter. Follow
the instructions on the LCD.
CHNG INK SET
You can change the ink set. See “Changing the Ink Set” on page
268.
PWR CLEANING
You can clean the print head more effectively than normal head
cleaning.
CLOCK SETTING
You can set year, month, date, hour, and minute.
To Next Page
Loading...
