Epson STYLUS PRO 4910 - Page 422

Epson Stylus Pro 4900/Epson Stylus Pro 4910 Revision A
MAINTENANCE Lubrication 423
Confidential
8
PULLEY, DRIVEN
UNIT
On the shafts where it contacts with HOLDER, PULLEY,
CR of PUSH, PULLEY, DRIVEN
 When an error occurs in CR operation.
 When an abnormal noise comes from the
CR Unit.
Part name:G-71
Part code:1304682
φ 2 mm injector p.430
9
PAPER GUIDE,
LOWER UNIT
Two hooks of Shaft Retard Reset
 Load reduction and wear protection.
 When an error occurs in paper feeding
from ASF.
 Lubricate when Retard Roller is
replaced.
Part name:G-71
Part code:1304682
φ 2 mm injector p.430
Lubrication
No.
Corresponding Part Lubrication Points Purpose/Timing Name of Lubricant Lubrication Tool Reference