Epson Stylus Pro 4900/Epson Stylus Pro 4910 Revision A
MAINTENANCE Lubrication 424
Confidential
[Lubrication 1-1] [Lubrication 1-2]
Part Name Pickup Unit
Lubrication Point
On the portion where it contacts with FRAME ASSEMBLY,
MIDDLE, RIGHT
Lubricants (Part Code) Grease G-71 (1304682)
Amount φ 2 mm once around the portion
Lubrication Tool φ 2 mm injector
Lubrication Manner Apply the specified amount with an injector.
Note Spread the lubricant evenly by rolling the lubricated part.
Lubrication Point
Part Name Pickup Unit
Lubrication Point
A: On the portion where it contacts with SPUR GEAR, 76.8,
RIGHT
B: On the portion where it contacts with SPUR GEAR, 76.8, LEFT
Lubricants (Part Code) Grease G-71 (1304682)
Amount φ 2 mm once around the portion
Lubrication Tool φ 2 mm injector
Lubrication Manner Apply the specified amount with an injector.
Lubrication Point A
Lubrication Point B
To Next Page
Loading...
