Epson STYLUS PRO 4910 - Page 424

Epson Stylus Pro 4900/Epson Stylus Pro 4910 Revision A
MAINTENANCE Lubrication 425
Confidential
[Lubrication 1-3] [Lubrication 2]
Part Name Pickup Unit
Lubrication Point On the bearings of the SHAFT, ROLLER, PICKUP
Lubricants (Part Code) Grease G-71 (1304682)
Amount φ 2 x 3 mm x 5 points
Lubrication Tool φ 2 mm injector
Lubrication Manner Apply the specified amount with an injector.
Note ---
Lubrication Points
Part Name HOLDER, LEVER, EDGE GUIDE RELEASE
Lubrication Point
A: On the portion where contacts with HOLDER, LEVER, EDGE
GUIDE RELEASE
B: On the portion where contacts with SPUR GEAR, 48
Lubricants (Part Code) Grease G-71 (1304682)
Amount
Α: φ 2 x 3 mm x 2 points
Β: φ 2 x 3 mm x 2 points
Lubrication Tool φ 2 mm injector
Lubrication Manner Apply the specified amount with an injector.
Note
After lubricating Point B, spread the lubricant evenly by rolling
SPUR GEAR, 48.
Lubrication Point A
Lubrication Point B