Epson STYLUS PRO 4910 - Page 427

Epson Stylus Pro 4900/Epson Stylus Pro 4910 Revision A
MAINTENANCE Lubrication 428
Confidential
[Lubrication 7-1] [Lubrication 7-2]
Part Name CR Unit
Lubrication Point On the shaft which is attached with SUPPORT ROD, SHAFT, CR
Lubricants (Part Code) Grease G-84 (1516265)
Amount φ 2 x 8 mm x 4 points
Lubrication Tool
 φ 2 mm injector
 Waste cloth
Lubrication Manner
Apply the specified amount with an injector. Using the waste cloth,
spread the lubricant evenly around the shaft.
Note ---
Lubrication Points
Part Name CR Unit
Lubrication Point Inside HOLDER, OIL PAD
Lubricants (Part Code) Oil O-17 (1521154)
Amount 0.09cc +- 10%
Lubrication Tool Container for Oil O-17
Lubrication Manner
Detach HOLDER, OIL PAD. (p181)
Place the Oil Pad in the container and pour in the specified amount
of oil. After one minute of soaking, take out the Oil Pad and attach
to HOLDR, OIL PAD.
Note ---
Lubrication Point
CR Unit