Control panel
A
P button (power button)
Turns the power on and off.
B
P light (power light)
The printer's operational status is indicated by a lit or
flashing light.
On : The power is on.
Flashing : The printer is receiving data or
performing head cleaning or other
operations during shut-down.
Off : The power is off.
C (button (Load/Remove Paper button)
Pressing this button displays the Load/Remove
Paper menu. Instructions for loading or removing
the paper can be displayed by highlighting either
Remove Paper or the type of paper currently loaded
and then pressing the Z button. Follow the
on-screen instructions to load or remove the paper.
D Display
Displays the printer's status, menus, error messages,
and so on. U “Understanding the Display” on
page 11
E Menu button
Displays the menu for the tab currently selected in
the display. U “Using the Control Panel Menu” on
page 46
F y button (back button)
If menus are displayed, pressing this button takes
you up one level in the menu hierarchy. U “Menu
Operations” on page 46
G
l/r buttons (left and right arrow buttons)
❏ Use these buttons to select tabs. The selected tab is
highlighted and the content of the info display area is
updated for the selected tab.
U “Understanding the Display” on page 11
❏ If menus are displayed, these buttons can be used to
position the cursor or delete characters when entering
text for items such as Setting Name or IP Address.
H
u/d buttons (up and down buttons)
When menus are displayed, these buttons can be
used to highlight items or options. U “Menu
Operations” on page 46
I Z button
❏ Displays the menu for the tab currently selected in the
display.
U “Using the Control Panel Menu” on page 46
❏ When menus are displayed and an item is highlighted,
pressing this button displays the sub-menu for the
highlighted item.
❏ If pressed while a parameter is selected from the
Menu, the parameter is set or executed.
J [ ] button
Displays the information display area for the B tab.
K " button (maintenance button)
Displays the Maintenance menu, which is used for
nozzle checks and head cleaning.
U “Clearing clogged nozzles” on page 81
SC-F6300 Series User's Guide
Introduction
10