Specifications Table
Printer Specifications
Printing method On-demand ink jet
Nozzle configura-
tion
360 nozzles x 2 rows x 4 colors
(Black
*1
, Cyan, Magenta, Yellow)
Resolution (maxi-
mum)
720 × 1440 dpi
Control code ESC/P raster (undisclosed
command)
Paper feed method Friction feed
Built-in memory 512 MB for Main
128 MB for Network
Interface Hi-Speed USB-Compatible with the
USB 2.0 Specification.
100Base-TX/1000Base-T
*2
Rated voltage AC100-240V
Rated frequency 50-60 Hz
Rated current 1.0 to 0.5 A
Power consumption
In use Approximately 65 W
Sleep mode 3.0 W or less
Power off 0.4 W or less
Temperature and humidity (without condensation)
Recommended 15 to 25˚C, 40 to 60%
In use 15 to 35˚C, 20 to 80%
In storage
(Before
unpacking)
-20 to 60˚C, 5 to 85%
(Within 120 hours at 60 ˚C, within a
month at 40 ˚C)
In storage
(Before charging
ink)
-20 to 40˚C, 5 to 85%
(Within a month at 40 ˚C)
Printer Specifications
Temperature and humidity range
Gray area: Printing
Cross-hatch lines: Recommended
Dimension (W) 1608 x (D) 914 x (H) 1128 mm
Weight
*3
93 kg
*1 High Density Black or Black
*2 Use a shielded twisted pair cable (category 5e or better).
*3 Not including ink or the auto take-up reel unit.
Ink Specifications
Type Dedicated ink pack
Sublimation dye
ink
High Density Black, Black, Cyan,
Magenta, Yellow
Use by date Date printed on the ink pack (stored
at normal temperatures)
Print quality
guarantee expiry
25 days (from the day the ink tank
was refilled with an ink pack)
Storage
temperature
5 to 35˚C
Capacity 1100 ml
Note:
To ensure the colors you want to print, maintain a
constant room temperature of 15 to 25˚C.
c
Important:
Use this printer at altitudes below 2000 m.
SC-F6300 Series User's Guide
Appendix
106
To Next Page
Loading...
Need help?
General