Menu Descriptions
Paper menu
Item Parameter Explanation
Load/Remove Paper
Remove Paper Press the Z button to display removal instructions on the screen.
Follow the on-screen instructions to remove the paper.
Instructions are not displayed if no paper is loaded.
Roll Paper After making your selection, press the Z button. Follow the
on-screen instructions to load the paper.
If roll paper is already loaded when you make your selection, the
instructions for removing the loaded paper are displayed before
loading instructions are shown.
Select Paper Type
1 to 10 (paper setting number)
Select to change from the paper type set in Select Paper Type
displayed after loading paper.
Select a number between 1 and 10 to use the settings in the
corresponding paper settings. Execute Custom Paper Setting to
save the paper settings to a number.
Custom Paper Setting
SC-F6300 Series User's Guide
Using the Control Panel Menu
51
To Next Page
Loading...
