Refilling and Replacing Consumables
When to perform Component to be replaced
If the remaining ink level is 50 mm or
less
A Ink refill
U “Refilling ink” on page 73
When a replacement message is
displayed on the control panel
B Waste Ink Bottle
U “Disposing of Waste Ink” on page 79
The paper is not cut neatly/Cut
edges are frayed
C Cutter
Performing maintenance when print quality declines
When horizontal lines appear or the colors are wrong
Perform the following sequence until the problems in the print results have improved.
SC-F6300 Series User's Guide
Maintenance
62
To Next Page
Loading...
