E
Move the right-side roll core holder to the right
edge of the paper.
F
Move the lock lever on the roll core holder to the
lock position to secure the roll core holder.
G
Insert the roll core onto the right holder.
H
Check that the left-side roll core holder is fully
inserted into the roll core and that the roll core
and edges of the paper are not misaligned.
c
Important:
If the edges of the paper are misaligned, the
paper cannot be taken up correctly. If the edges
are misaligned, unlock the lock lever on the
right-side roll core holder, and then start again
from step 5.
SC-F6300 Series User's Guide
Basic Operations
37
To Next Page
Loading...
