Epson SureColor SC-F6300 Series - Attaching Paper Printed Side Out; Attaching Paper with Printed Side Out

A
Tape the leading edge to the roll core.
In the order shown in the illustration below, use
commercially available tape to tape the paper.
When attaching in the center, attach using tape
while pulling the center of the paper straight.
When attaching using the left and right sides,
attach using tape while pulling the paper to the
side.
B
Press the d button on the control panel until you
have fed enough paper for about one full wrap
around the roll core.
C
Flip the Manual switch to Forward to wrap the
paper once around the roll core.
D
Flip the Auto switch to Forward.
SC-F6300 Series User's Guide
Basic Operations
40