Item Parameter
Head Cleaning
All Nozzles Execute (Light), Execute (Medium), Execute (Heavy)
Selected Nozzles Execute (Light), Execute (Medium), Execute (Heavy)
Cutter Maintenance
Adjust Cut Position -3 to 3 mm
Replace Cutter Press Z to start move.
Head Maintenance Yes, No
Head Cap Cleaning Press Z to move the head
y to cancel
Waste Ink Counter -
/Setup menu
U “Setup menu” on page 54
Item Parameter
Printer Setup
Roll Paper Setup
Auto Cut On, Off
Refresh Margin On, Off
Page Line On, Off
Roll Paper Margin
Side 3mm, 15mm
Top 5mm, 15mm
Bottom 5m, 15mm, 150mm
Roll Paper Remaining On, Off
Remaining Alert 1 to 15 m
SC-F6300 Series User's Guide
Using the Control Panel Menu
48
To Next Page
Loading...
