F Waste Ink Bottle
Waste ink collects in this bottle.
Replace with a new Waste Ink Bottle when the level approaches the line.
G Stopper
The stopper prevents splatter when the waste ink is ejected.
Fit the stopper closely to the mouth of the Waste Ink Bottle in most situations.
H Waste ink tube
Waste ink is discharged from this tube. Be sure the end of this tube is in the Waste Ink Bottle while the printer is in
use.
I Option port
Connect the cable for the optional Auto Take-up Reel Unit.
J Data lamp
The data lamp lights or flashes to indicate the network connection status and whether the printer is receiving data.
On : Connected.
Flashing : Receiving data.
K LAN port
Connects the LAN cable.
L Status lamp
The color indicates the network's communication speed.
Red : 100Base-TX
Green : 1000Base-T
M USB port
Connects the USB cable.
N Ink tank
This holds the ink to be used for printing.
O Stirring stick
This only comes with ink tanks for High Density Black ink. Stir the ink in the ink tank once a week.
P Slider
U “Slider” on page 9
SC-F6300 Series User's Guide
Introduction
6
To Next Page
Loading...
Need help?
General