Item Parameter Explanation
Date And Time Set the printer’s built-in clock.
Time Zone Enter the difference between the current time zone and GMT.
The selected time zone is used in e-mail notifications sent by Remote
Manager when an error occurs and so on.
Remote Manager is a standard utility built-into the printer's network
interface that allows you to check the printer's status and make
network settings. Enter the IP address specified for the printer in the
web browser you are using on your computer to start the software.
Starting Remote Manager U “Using Remote Manager” on
page 21
Reset All Settings Yes
Select Yes to restore defaults for all settings except the Date And
Time, Language, and Unit: Length options in the Setup menu.
No
SC-F6300 Series User's Guide
Using the Control Panel Menu
60
To Next Page
Loading...
