C
In one-second intervals, move the stirring stick
up and down. Repeat about 15 times.
When moving the stirring stick up and down,
raise the stirring stick until the hook on the
stirring stick is completely visible, and then lower
it until the ink inlet cap touches the ink tank.
c
Important:
Move the stirring stick slowly. If you move it
too quickly, ink may splatter.
D
Put the ink inlet cap back on the ink tank.
c
Important:
Press the ink inlet cap down firmly so that it
does not detach. If the slider comes into contact
with the ink inlet cap when pulling it out, the
cap could be damaged.
SC-F6300 Series User's Guide
Maintenance
71
To Next Page
Loading...
