106
Advanced settings
Sets the advanced settings on the printer.
Item Description
Paper feed adjustment (Mech wear) Sets the paper feed adjustment (Mech wear) when images
fade.
Adjust media detection sensor Starts the calibration of the detection sensor.
Replace settings
from printer using
ZPL II commands
Replace settings
from printer using
ZPL II commands
Performs replacing settings from the printer using ZPL II
commands. Click [Set] to display the "Replace settings from
printer using ZPL II commands" screen.
Set prefix text
Sets the prefix text.
Set Printer's Favor-
ite Settings
Here you can save the favorite settings to the product or apply
the saved favorite settings to the product.
See
"Saving favorite settings" on page 108.
To Next Page
Loading...
