Epson TM-C7500 Series User Manual

215
Appendix
Media detector and paper path settings 
when using label printing applications
If you do not configure the media detector settings and the paper path settings correctly when using
label printing applications, a media detector error or a paper path error will occur and printing will
not be possible.
Here are the instructions for configuring the following label printing application.
•Changing the media detector settings in BarTender : page 216
•Changing the paper path settings in BarTender : page 218
•Changing the media detector settings in NiceLabel : page 219
•Changing the paper path settings in NiceLabel : page 221
•Changing the media detector settings in CODESOFT : page 222
•Changing the paper path settings in CODESOFT : page 223
 These configuration instructions are for the following version of the label printing applica-
tion. In other versions, the functions or configuration methods may differ.
 BarTender: BarTender Enterprise Automation Version 10.1 SR3
 NiceLabel: NiceLabel Pro DEMO Version 6.3.1
 CODESOFT: CODESOFT 2014 - Enterprise RFID Version 2014.00.00
 Adjust the settings to the media you wish to use. Even if the settings of the label printing
applications and that of the device are the same, an error will occur if the media types do
not match.

Epson TM-C7500 Series Specifications

General

Brand	Epson
Model	TM-C7500 Series
Category	Label Maker
Language	English