182
Installing software
You can use the CD-ROM that comes with the product to install the following software.
•Printer driver
•Printer setting utility (PrinterSetting)
•USB Replacement Service
•EpsonNet Config
Software installation procedures
Install the software using the following steps.
1
Turn on the computer.
2
Check that the product's power is OFF.
3
Insert the CD-ROM in your computer and the Launcher automatically starts.
Click [Install Software].
4
The following screen is displayed. Place a checkmark on the installation
software and click [Next].
The selected software is installed.
Make sure the printer's power is OFF.
To Next Page
Loading...
