Epson TM-C7500 Series User Manual

155
Chapter 3 Handling
3
Restart the printer after long-term storage
When restarting the printer after a long-term storage, follow the steps below.
1
Check whether or not the ink cartridge storage period has been expired.
2
Turn on the product. The Nozzle Verification Technology runs to check for
nozzle clogging, and then runs head cleaning automatically.
3
Run a nozzle check print and check whether dot missing or any other print-
ing problems have occurred.
In the cases listed below, replace the ink cartridge.
See
"Installing the Ink Cartridge" on page 43
 2 years has passed since the ink cartridge was manufactured
 6 months has passed since the ink cartridge was opened
CAUTION
Do not turn the product off or do not open Ink cartridge cover, Front cover, Rewinder
connection cover, Maintenance box cover, or Paper set cover during the head cleaning
operation.

Epson TM-C7500 Series Specifications

General

Resolution	600 x 1200 dpi
Colours	Cyan, Magenta, Yellow, Black
Power Supply	Internal
Print Speed	Up to 300 mm/sec
Media Width	2" (50 mm) - 4.25" (108 mm)
Interface	USB, Ethernet
Weight	Approximately 37 kg
Print Width	4.09" (104 mm)
Media Types	Roll
Supply Voltage	AC 100-240V, 50/60 Hz
Media Thickness	0.08 to 0.2 mm