207
Appendix
Environmental Conditions
Item Specification
Temperatures
/humidity
Printing 5 to 35 C {41 to 95 F}, 20 to 80 %RH (no condensation)
Barcode printing 15 to 35 C {59 to 95 F}, 20 to 80 %RH (no condensation)
Storage When packed (No condensation, ink not loaded):
-20 to 60 C {-4 to 140 F}, 5 to 85 %RH
(At -20 or 60 C {-4 or 140 F}: up to 120 hours)
With ink loaded -20 to 40 C {-4 to 104 F}
(At -20 C {-4 F}: up to 120 hours)
(At 0 to 25 C: {32 to 77 F}: up to 6 months)
(At 40 C {104 F}: up to 1 month)
Absolute maximum rated 70 C {158 F}
Pressure
(elevation)
Operating 700 to 1060 hPa (approximately 0 to 2,500 m above sea level)
{approximately 0 to 98425.20”}
Not operating
(including in
transportation)
700 to 1060 hPa (approximately 0 to 2,500 m above sea level)
{approximately 0 to 98425.20”}
Vibration
resistance
When packed Frequency: 5 to 55 Hz
Acceleration: Approximately 19.6 m/s2 {2 G}
Sweep: 10 minutes (half cycle)
Time: 1 hour
Orientation: x, y, and z
Shock
resistance
When packed Packing: Epson standard package specifications
Height: 45 cm {17.72"}
Orientation: 1 corner, 3 edges, and 6 surfaces
When unpacked Height: 5 cm {1.97"}
Orientation: Lift one edge and release it (for all 4 edges)
Noise During
operation
Approximately 55 dB (ANSI Bystander position)
Based on Epson evaluation conditions including the use of the
autocutter.
To Next Page
Loading...
Need help?
General
