131
Chapter 3 Handling
3
2D symbol Printing
The printer driver has the built-in 2D symbol font. 2D symbol printing is available if the 2D symbol
is not created on the application side.
Setting the 2D Symbol font
2D symbol print settings can be changed on [Barcode and 2D Symbol Settings] on [Driver Utilities]
tab.
1
Change settings of the following.
•Display: Select [2D Symbols].
•Font Name: Input an arbitrary character string. ASCII characters only.
•Type: Select a 2D symbol type. The displayed items are changed
accordingly.
•Rotation Settings: Select a setting when printing the 2D symbol rotated by the
specified rate.
• Hexadecimal Input Mode: Turn on the check box when the data for 2D symbol is
specified on
Hexadecimal Input Mode.
To Next Page
Loading...
