Epson TM-C7500 Series User Manual

47
Chapter 2 Setup
2
Installing the Maintenance box
The Maintenance box is already installed when the product is shipped.
Replacing Maintenance Box
While using the product, waste ink is collected in the Maintenance box. The status of the
Maintenance box is shown as follows.
•MB NEAR FULL
• REPLACE MB
MB NEAR FULL
When the ink level in the ink cartridge becomes low, Ink LED flashes and [MB NEAR FULL] is
displayed on the LCD.
When "MB NEAR FULL" is displayed, prepare to replace the maintenance box.
The number of papers that can be printed before status changes from "MB NEAR FULL" to
"REPLACE MB" depends on usage conditions.
CAUTION
Read the handling instructions carefully before installing the Maintenance box.
See
"Cautions on the Ink Cartridge / Maintenance box" on page 6.
When [INK LOW LED] is set to not be displayed, the Ink LED does not flash.

Epson TM-C7500 Series Specifications

General

Resolution	600 x 1200 dpi
Colours	Cyan, Magenta, Yellow, Black
Power Supply	Internal
Print Speed	Up to 300 mm/sec
Media Width	2" (50 mm) - 4.25" (108 mm)
Interface	USB, Ethernet
Weight	Approximately 37 kg
Print Width	4.09" (104 mm)
Media Types	Roll
Supply Voltage	AC 100-240V, 50/60 Hz
Media Thickness	0.08 to 0.2 mm