Epson TM-C7500 Series User Manual

46
Replacing the ink cartridge
As the product is being used, the status of the ink cartridge changes as shown below.
•INK LOW
• REPLACE INK
INK LOW
When the ink level in the ink cartridge becomes low, the Ink LED flashes and [INK LOW] is
displayed on LCD.
When "INK LOW" is displayed, prepare to replace the ink cartridge.
The number of printable papers that can be printed before the status changes from "INK LOW" to
"REPLACE INK" depends on usage conditions.
REPLACE INK
When there is no ink in the ink cartridge, the Ink LED is lit, [REPLACE INK] is displayed on LCD
and the product changes to offline.
Change to an ink cartridge with enough ink level using the following steps.
1
Check that the Ink LED is ON. Also, check the ink cartridge to be replaced
with the LCD display.
2
Open the ink cartridge cover.
3
Push the ink cartridge to be replaced slowly. After making sure that its lock is
unlocked, pull the ink cartridge out toward you.
4
Shake the ink cartridge package four or five times before opening it.
5
Push the ink cartridge into the product slowly until you hear the click sound.
6
Close the ink cartridge cover.
7
When replacement of the ink cartridge is complete, the Ink LED becomes
OFF.
8
The product switches to the pause state. Push the Pause button to release
it, and the product returns to the idle state.
When [INK LOW LED] is set to not be displayed, the Ink LED does not flash.

Epson TM-C7500 Series Specifications

General

Brand	Epson
Model	TM-C7500 Series
Category	Label Maker
Language	English