Epson TM-C7500 Series User Manual

139
Chapter 3 Handling
3
Printing barcode and 2D symbol
Sets specified number of point, language of the replaced True Type font by barcode and 2D symbol
font to the print data.
 The number of point for barcode and 2D symbol is specified, check it from [Barcode and 2D
Symbol] on [Driver Utilities]. The barcode and 2D symbol can not be printed if a value other
than those specified is set.
 The replaced True Type font can be used only for specifying barcode and 2D symbol, therefore,
if the character other than specified is used can not be printed. Make sure to use True Type font
that is not be used for other printing.

Epson TM-C7500 Series Specifications

General

Resolution	600 x 1200 dpi
Colours	Cyan, Magenta, Yellow, Black
Power Supply	Internal
Print Speed	Up to 300 mm/sec
Media Width	2" (50 mm) - 4.25" (108 mm)
Interface	USB, Ethernet
Weight	Approximately 37 kg
Print Width	4.09" (104 mm)
Media Types	Roll
Supply Voltage	AC 100-240V, 50/60 Hz
Media Thickness	0.08 to 0.2 mm