179
Chapter 4 Application Development Information
4
Printing
Print in your actual usage environment and check the printing result.
Adjusting Font Width
After checking the printing resu lt, if you want to adjust the character width of the printed item, you
can use PrinterSetting to perform adjustment. Display the "Replace settings from printer using ZPL
II commands" window and adjust the font width.
For the method to display the "Replace setting
s from printer using ZPL II commands" window, see
"Replace settings from printer using ZPL II commands" on page 107.
If you want to change the height of characters or the space between lines, perform settings on
the application.
To Next Page
Loading...
