27
Chapter 1 Product Overview
1
●●---
POWER SAVING
* * * * *
Idling (with power
saving)
If the product does not operate for
30 minutes or more while the power
is ON, it moves to the power saving
mode.
▼● ---
PRINTING
* * * * *
Printing A beep sounds when printing is
done.
▼● ---
WORKING
* * * * *
After printing is done,
the printer moves to
idling
● - ● --
PAUSE
* * * * *
Pause When the Pause button is pushed
during printing, the printer
becomes this status.
It is possible to go to the setting
mode from this state.
●✓---
MENU
* * * * *
Menu When the Menu button is pushed,
the printer becomes this status.
● - ● --
CANCELING JOB
* * * * *
Canceling the jobs When the Cancel button is pushed
during printing, print jobs are
canceled, printing is interrupted
and print data inside the printer
are deleted.
●
●
---
PRINTING-NOZZLE
CHECK DISABLED
* * * * *
Nozzle Verification
Technology is
disable(*)
When dot dropouts cannot be
detected due to low
environmental temperature, the
LCD display shows a message.
Printing continues.
●
●
---
NOZZLE CLOGGED
* * * * *
Unrecoverable nozzle
dropouts happen (*)
This display is shown when
unrecoverable nozzle dropouts
happen. Printing continues.
●
●●
--
NOZZLE CLOGGED
CHECK THE PRINT
PRESS PAUSE
TO CONTINUE
Nozzle clogged (*) Printing is paused temporarily, since
nozzle dropouts happened during
printing. Printing restarts when the
Pause button is pushed. When
canceling printing, push and hold
the CANCEL button for two
seconds or more before pushing
the Pause button.
button and button switch
the LCD display.
LED
LCD Printer Status Description
(Power) LED
Status LED
Pause LED
Paper LED
Ink LED
To Next Page
Loading...
Need help?
General
