Epson TM-C7500 Series

85
Chapter 3 Handling
3
COLOR CONTROLS MODE  EPSON PREFERRED
 EPSON STANDARD
EPSON
PREFERRED
INK PROFILE -6 to +4 0
RATIO OF BLACK -6 to 0
(Available settings
vary with media type)
0
FEATHER EDGES  ENABLE
 DISABLE
DISABLE
DOT SUBSTITUTION  ENABLE
 DISABLE
ENABLE
BANDING -2 to +2 0
MAINTENANCE CALIBRATION  YES
 NO
-
INK RECHARGE  YES
 NO
-
PRINT INFO  STATUS BASIC
 STATUS SETUP
 STATUS NETWORK
 LIST FONT
 LIST BARCODE
 LIST IMAGE
 LIST TEMPLATE
-
MAINT. COUNTERS TOTAL LENGTH ********[mm] -
LENGTH 1 ********[mm] -
LENGTH 2 ********[mm] -
LABELS 1 ********[labels] -
LABELS 2 ********[labels] -
TOTAL CR ********[motions] -
TOTAL AUTO CUT ********[motions] -
FW VERSION  MAIN
 NETWORK
 FPGA
 CG
-
I/F SETUP IP SETUP  AUTO
 MANUAL
MANUAL
IP ADDRESS ***.***.***.*** 192.168.192.168
SUBNET MASK ***.***.***.*** 255.255.255.000
DEFAULT GATEWAY ***.***.***.*** 255.255.255.255
FAVORITE SETTING The favorite settings
you have saved will
be displayed.
-
Settings menu item Available settings Default setting