88
Important points
•If the [Media Detection] or [Media source] settings in [Favorite setting] are different from the
printer settings, a media detection error or a paper path error will occur. If that happens, refer to
the "Troubleshooting" section, remove the error and configure [Favorite setting] again.
•You can select [Favorite setting] on the operation pa
nel or in PrinterSetting.
•If the settings could not be configured, [PRINTER IS BUSY CHANGE FAILED] will appear for 3
seconds. Check the printer status again and reconfigure the settings.
• The application settings will be given priority over the settings in [Favorite setting] of the printer.
To Next Page
Loading...
