21
Chapter 1 Product Overview
Statuses and Errors
The status of the product can be checked from a combination of the LEDs lighting/flashing and the LCD dis-
play.
Product operation stops when an error occurs. For details on resolving errors, refer to “Error Message Dis-
played
on the LCD” on page 85.
An ink cartridge is not installed. An ink cartridge must be loaded to print on
cut sheets.
There is not enough ink for periodic ink head cleaning. The ink cartridge needs
to be replaced to perform cleaning.
LED
LCD display Product status
POWER ERROR
Cut sheets are jammed in the MICR reader. (“Cut Sheet Jam” on page
89)
C
ut sheets are jammed in the back of the product
(“Cut Sheet Jam” on page 89)
C
ut sheets are jammed in the scanner
(“Cut Sheet Jam” on page 89)
LCD display Status
To Next Page
Loading...
