41
Chapter 2 Setup
5
Gently press the ink cartridge into the product.
6
Close the ink cartridge cover.
Ink charging starts. The (POWER) LED flashes during ink charging. It takes up to 4 minutes to charge the
ink the first time ink cartridges are installed in the product.
When ink charging completes, the (POWER) LED changes from flashing to on.
The installing of ink cartridges is now complete.
CAUTION
Never open any cover of the printer or turn off the printer during ink charging (while the
(POWER) LED is flashing). Doing so will consume a large amo
unt of ink, which may result in the
need to replace the ink cartridges before the completion of charging.
The ink cartridges included in the product package are used for initial charging. The product uses
ink to prepare for printing (ink charging) when the ink cartridges are installed for the first time.
To Next Page
Loading...
