Also, you can use Web Cong by connecting the printer directly to the computer using an Ethernet cable, and then
entering the IP address into a web browser.
e
printer can be connected in a secure environment
aer
the security
settings have been completed.
Controlling Using Protocols
You can print using a variety of pathways and protocols.
If you are using a multi-function printer, you can use network scanning and PC-FAX from an unspecied number
of network computers.
You can lower unintended security risks by restricting printing from
specic
pathways or by controlling the
available functions.
Controlling protocols
Congure the protocol settings.
1.
Access Web Cong and then select the Network Security tab > Protocol.
2.
Congure
each item.
3.
Click Next.
4.
Click OK.
e settings are applied to the printer.
Related Information
& “Application for Conguring Printer Operations (Web Cong)” on page 348
& “Protocols you can Enable or Disable” on page 494
& “Protocol Setting Items” on page 495
Protocols you can Enable or Disable
Protocol Description
Bonjour Settings You can specify whether to use Bonjour. Bonjour is used to search for devices, print, and so
on.
iBeacon Settings You can enable or disable the iBeacon transmission function. When enabled, you can search
for the printer from iBeacon-enabled devices.
SLP Settings You can enable or disable the SLP function. SLP is used for push scanning and network
searching in EpsonNet Cong.
WSD Settings You can enable or disable the WSD function. When this is enabled, you can add WSD devices,
and print from the WSD port.
LLTD Settings You can enable or disable the LLTD function. When this is enabled, it is displayed on the
Windows network map.
Administrator Information
>
Advanced Security Settings
>
Controlling Using Protocols
494
To Next Page
Loading...
Need help?
General
