1.
Turn o the printer by pressing the
P
button.
2.
Unplug the power cord, and then disconnect the power cord.
3.
Disconnect the USB cable, and then remove the memory card and external USB device.
4.
Pull out the paper cassettes.
For paper cassette 2, li it up slightly, and then pull it out.
5.
Stand the printer with the control panel's
P
button at the top.
!
Caution:
Be careful not to trap your hand or ngers when standing the printer. Otherwise you may be injured.
Maintaining the Printer
>
Improving Paper Feeding Problems
161
To Next Page
Loading...
