The paper is moist or damp.
Solutions
Load new paper.
Static electricity is causing sheets of paper to stick to each other.
Solutions
Fan the paper before loading. If the paper still does not feed, load one sheet of paper at a time.
Too many sheets are loaded in the printer.
Solutions
Do not load more than the maximum number of sheets specied for the paper.
& “Available Paper and Capacities” on page 289
The paper settings on the printer are incorrect.
Solutions
Make sure the paper size and paper type settings match the actual paper size and paper type loaded in the
printer.
& “Paper Size and Type Settings” on page 32
Paper slips when paper dust adheres to the roller.
Solutions
Clean the roller.
& “Improving Paper Feeding Problems” on page 160
Multiple sheets of paper feed at the same time during manual 2-sided printing.
Solutions
Remove any paper that is loaded in the paper source before you reload the paper.
CD/DVD Tray is Ejected when You Try to Load It
The disc has not been placed properly.
Solutions
Place the disc again properly.
& “Printing Photos onto a CD/DVD Label” on page 65
& “Copying on a CD/DVD Label” on page 134
Solving Problems
>
The Printer Does Not Work as Expected
>
Paper Does Not Feed Properly
187
To Next Page
Loading...
