Note:
❏ When the maintenance box is full, you cannot print and clean the print head until it is replaced to avoid ink leakage.
However, you can perform operations that do not use ink such as scanning.
❏ When the following screen is displayed, the part cannot be replaced by users. Contact Epson support.
Borderless printing is not available, but printing with a border is available.
1.
Remove the new maintenance box from its package.
c
Important:
Do not touch the green chip on the side of the maintenance box. Doing so may prevent normal operation and
printing.
Note:
A transparent bag for the used maintenance box is provided with the new maintenance box.
2.
Li up paper cassette 2 slightly to pull it out.
3.
Open the control panel.
Solving Problems
>
It is Time to Replace the Maintenance Box
>
Replacing a Maintenance Box
236
To Next Page
Loading...
