Epson XP-8600 Series

5.
Select the SSID for the wireless router.
Note:
❏ If the SSID you want to connect to is not displayed on the printer’s control panel, tap Search Again to update the list.
If it is still not displayed, tap Enter Manually, and then enter the SSID directly.
❏ If you do not know the network name (SSID) check if the information is written on the label of the wireless router. If
you are using the wireless router with its default settings, use the SSID on the label. If you cannot nd any
information, see the documentation provided with the wireless router.
6.
Tap the Enter Password eld, and then enter the password.
Note:
❏ e password is case-sensitive.
❏ If you do not know the password, check if the information is written on the label of the wireless router. On the label,
the password may be written "Network Key", "Wireless Password", and so on. If you are using the wireless router
with its default settings, use the password written on the label.
7.
When you have setup nished, tap Start Setup.
8.
Tap Close.
e
screen automatically closes
aer
a
specic
length of time if you do not tap Close.
Note:
If you fail to connect, load A4 size plain paper, and then tap Print Check Report to print a connection report.
9.
Tap Close on the network connection settings screen.
Related Information
& “Entering Characters” on page 27
& “Checking the Network Connection Status” on page 280
Making Wi-Fi Settings by Push Button Setup (WPS)
You can automatically set up a Wi-Fi network by pressing a button on the wireless router. If the following
conditions are met, you can set up by using this method.
❏ e wireless router is compatible with WPS (Wi-Fi Protected Setup).
❏
e
current Wi-Fi connection was established by pressing a button on the wireless router.
1.
Tap
on the home screen.
2.
Tap Wi-Fi (Recommended).
3.
Tap Start Setup.
If the network connection is already set up, the connection details are displayed. Tap Change Settings to
change the settings.
4.
Tap Push Button Setup (WPS).
Adding or Replacing the Computer or Devices > Re-setting the Network Connection > Making Wi- …
267