Epson XP-8600 Series

10.
Select the photo you want to print on the select photo screen, and then select Done.
Select Single View, and then select
to edit the photo if necessary.
“Menu Options for Editing Photos” on page 70
11.
Repeat steps 9 to 10 until all photos are placed.
12.
Select Next.
13.
Make the settings on the Basic Settings tab, and then set the number of copies.
“Menu Options for Paper and Print Settings” on page 69
14.
Select Advanced Settings tab, and then change the settings as necessary.
15.
Select Basic Settings tab, and then tap
x .
Printing at ID Photo Size
You can print ID photos using data on a memory device. Two copies of one photo are printed at two dierent sizes,
50.8×50.8 mm and 45.0×35.0 mm, on 10×15 cm (4×6 in.) size photo paper.
1.
Load paper in the printer.
“Loading Paper in the Paper Cassette 1” on page 34
“Loading Paper in the Paper Cassette 2” on page 37
“Loading Paper in the Rear Paper Feed Slot” on page 41
2.
Insert a memory device into the SD card slot or the external interface USB port of the printer.
“Inserting a Memory Card” on page 55
“Inserting an External USB Device” on page 56
3.
Select Print Photos on the control panel.
4.
Select Collage > Print Photo ID.
5.
When a message telling you that loading photos is complete is displayed, select OK.
6.
Select
.
Printing > Printing Photos > Printing Photos from a Memory Device
63